OptiMate 4 car and motorcycle Battery Charger
January 3, 2009
Charging the battery of your car and motorcycle will be a very easy with the new OptiMate 4 car and motorcycle Battery Charger. For the enhanced operation this charger has a microprocessor control in it. This model has a very compact dimension and all the included features make it a very efficient product.
Product details
Input voltage of the OptiMate 4 Battery Charger is 220 - 240V AC and the output voltage is 12V DC. Maximum output current of the unit is 0.8A. Product supports internal temperature regulation. The stylish 2-tone IP64 rubberized sealed waterproof housing makes it a highly attractive product. Device gives you 5 possible charge retention test results and the bar graph of the charge current. The new cable brushings of the device avoid insulation stress in the ultra cold temperatures. Control panel of the unit has 19 LED indications. The enclosure of this battery charger is weather proof and has a built in built in mounting option in it.
This charger comes with new SAE weatherproof connections. For the easier connection all the connector’s supports glide guide function. The central LED of the unit displays the delivered current. Automatic Self-Diagnostic Test confirms the correct operation of the circuit. Warranty given to this unit is for a period of 2- years. The charger supports Dual-stage recovery action. All the LEDs give you enhanced indications.
| General Information | |
|---|---|
| Brand | OptiMate |
| Model | OptiMate 4 car and motorcycle Battery Charger |
| Charger Application | Car and motor cycle |
| Charger Capacity | 22V |
| Features | |
| LED indicator | Yes |
| Accessories | |
| Output extension set | Yes |
RING Smart 4 Amp Battery Charger
October 19, 2008
Battery chargers offer a wide range of help to our automobiles. The RING Smart 4 Amp Battery Charger is one such product which can surely score full marks in this regard. With the salient features the product is very much ideal for your Classic cars, motorbikes, remote control vehicles, caravans, motorised golf buggies, trolleys and many more.
Features Explained
The product has the fully insulated power connectors and battery terminal connectors which minimises the risk of short circuit and other accidents. The product is not just a mere charger but also a re-conditioner which can recondition the half dead batteries. This fully automatic charger charges battery in 3 stages. The multiple fast charge facility of the charger helps to charge faster as well as precisely. The condition of the charger can be checked with the remote. There is no need of AC mains power. The charger is capable of charging 2 volt lead acid battery. The voltage required for the charger is AC 220 – 240v with a Charging Current of 2 to 4 amps. The stand by amp of the product is 0.01.
The main speciality of the battery is that it is weather proof. It can be used in any weather conditions without any problems. The circuitry can top up battery intelligently to maintain battery condition in peak. The product is ideal for the cars and automobiles which are used only occasional. The product is also compatible with the diesel vehicles. The capacity of the charger is 12v and the maximum engine size of the batteries is 1200cc or 1200ltr. With the dimensions of 5.5 x 22.5 x 3 cm and with a weight of just 0.6 kg the product is very flexible and slim to fit for the auto mobiles. It is ideal for the batteries up to 50Ah.
The RING Smart 4 Amp Car Battery Charger is an ideal choice for your automobile and with an affordable price it can assure a quality performance.
| General Information | |
|---|---|
| Brand | RING |
| Model | Smart 4 Amp |
| Charger Application | Automobile |
| Charger Capacity | 12v |
| Size | 5.5 x 22.5 x 3 cm |
| Features | |
| Voltage safety controls | Yes |
| Car adapter | Available |
| Compatibility | Lead acid batteries |
| Weatherproof | Yes |
| Accessories | |
| Car Adaptor | Yes |
CTEK XS 25000 - 12v Battery Charger & Conditioner
October 17, 2008
Battery chargers offer a hand to hand help to the vehicles batteries that require
frequent charging. Unlike the conventional chargers the modern chargers have lot of advantages over them. The CTEK XS 25000 - 12v Battery Charger & Conditioner is a marvellous product which can be used in the boats, vehicles and workshops. It is designed in such a way that it is mounted in the vehicles where no user control is required. It is not just a mere charger but also a battery conditioner.
This car battery charger has the facilities including temperature sensor which makes it ideal for use in the lead-acid battery with a capacity of up to 500Ah. It is also compatible with the batteries like gel and AGM types. With the unique multi stage charging feature it can charge any battery to its maximum capacity. Even the partially charged sulphated batteries can be charged by the product. One of the staggering features of this product is that it can be used as a power supply when the AC230 V is available. It can be connected permanently with the batteries so that it will charge whenever it is needed. It is very safe that it can be left out even in the rain.
The operating voltage of the product is the 220V-240V AC with a frequency of 50-60 Hz. The charging in the charger is done with the Eight step fully automatic IUoUp, with pulse maintenance mode. The temperature range of the product is -20°C - + 50°C. The dimensions of the product are 233 x 128 x 64 mm with a weight of just over 1.4 kg. This fully automatic charger enters the conditional mode after the initial charge so there is no need of manual support. Nothing will happen to the battery even if the charger is not disconnected for months. The output voltage of the product is 12v and the charging voltage is 14.4 v in standard mode and 16.0 v in recovery mode.
The output current of the product is 25 Amp maximum. It can charge even drained batteries and the temperature is compensated for optimal charging voltage at all times. The product also has low back current drain and low ripple and input voltage. With the high efficiency of 85 % the charger is an advantage for your vehicles. The electronic safe system of the charger can prevent the damage of the vehicles electronic system. The anti spark system in the charger can prevent spark. The charger also has double insulation and cooling is done with the power controlled fan. Another feature of this product is the progressive temperature protection and hence it is possible to control the temperature inside the battery and charger.
The CTEK XS 25000 Battery Charger is a heavy duty charger that is ideal for the use in motor homes, boats and caravans.
| General Information | |
|---|---|
| Brand | CTEK |
| Model | XS 25000 - 12v |
| Charger Application | Automotive |
| Charger Capacity | 12 v |
| Size | 233 x 128 x 64 mm |
| Features | |
| Automatic cut-off | Yes |
| Temperature sensor | Yes |
| Voltage safety controls | Yes |
| Car adapter | Yes |
| Compatibility | Lead acid battery |
| Accessories | |
| Car Adaptor | Yes |
CTEK Multi XS 7000 (12V) Car Battery Charger Review
November 21, 2007
CTEK in the UK is a company to manufacture batteries and they have introduced Multi XS 7000 (12V) Car Battery Charger recently. These battery chargers
are used in large number of cars, boats and recreational vehicles. The supply mode is able to provide you with power even without a battery.
The battery charger also works as a memory saver, so you can unhook the battery without losing the settings and codes in the vehicle computer, anti-theft radios, key-less-entry system etc. The charger has Boost/ Recond mode which are able to recondition your battery after deep discharging. This battery charger is advisable for use with any type of battery with a competence of up to 250Ah. The charger is used with any type lead acid battery including gel and AGM type.
Any battery can be charged to its utmost prospective, as CTEK Multi XS 7000 (12V) Car Battery Charger has a unique multi-stage charging characteristic. Even partially sulphated batteries can regularly be revitalized by the CETK’S ”pulsing” feature.
While charging the battery it undergoes five steps. After charging the battery fully the charger switches off automatically. The charger is able to charge lead-acid batteries. If you are able to maintain the pulse charging of the charger then it increases the battery life and gives superb performance. The drained batteries also can be charged. The charger has supply mode for float maintenance for 100% state of charge.
The charger has got four option of power supply or as a boosting power such as 14.4volts, 14.7volts, 13.6volts as supply and 16 volts as boosting power. The charger has low back current drain, low ripple and input voltage independent. The ambient temperature is -20C / +50C and it has automatic reduction of power at increased ambient temperature.
CTEK Multi XS 7000 (12V) Car Battery Charger has natural convention of cooling and has 85% of high efficiency, which is delivered with connection lead with clamps. Its compact designed can be mounted on cars. It can be mounted on walls using two screws. The diameter of the mounting holes is 4.5 millimetre.
It is not needed to disconnect the charge from vehicle while charging and it is a safe electronic device which will not damage the vehicles electronics. The product is not affected by splash as it is a dust proof and approved for outdoor use.
